A blinking orange light on your wifi router usually means that there is a problem with the internet connection. If this happens, it is important to find the root cause of the issue and get your internet connected again. This will save you a lot of time and frustration.

Firstly, it is important to understand what the different LEDs mean on your router. This will help you to troubleshoot problems and avoid calling your internet service provider for a lengthy customer service call.

One of the most common causes of an orange LAN light is an incorrect Ethernet connection. This can be caused by a loose cable, bad connections between devices or faulty hardware on your router. You should check all the cords connecting your modem and the router to ensure that they are securely fastened.

If all the cables are properly secured, you may want to try a hard reset on your router. You can do this by pressing and holding the button on the back of the router for around 10 seconds.

The next step is to check your credentials for the network you are connected to and make sure that you have correct usernames and passwords. You should also remember to keep a note of these details so that you don’t forget them in the future.

Another possible cause of an orange WAN light is the wrong NAT settings in your home. This can happen when you have a second router or an ISP-provided modem-router combo device in your home. The double NAT in this case can prevent your router from working properly and the flashing orange light on the second device will indicate that there is a problem with it.

Once you have found the NAT setting that is causing the issue, you can change it. This will enable your router to connect to your internet through the other device and eliminate the pulsing orange light on your Google Wi-Fi.

Finally, it is a good idea to have a look at the MAC address of all your devices and make sure that they are all connected to the correct router. If you do not know your MAC address, you can use the defaults from your computer’s setup menu to find it.

You can also try changing the MAC address of all your devices by using a free online tool called ipconfig. This will automatically re-configure your devices to match the new network and will fix any connection issues you are having.

If none of the above methods work, it is likely that there is a software or firmware issue with your router. If this is the case, you will need to contact your ISP or purchase a new router. Alternatively, you could simply replace the firmware on your existing router to solve the problem.